Go Bottomlow range to neutral on BX 2200
 | Patriot
Join Date: Jul 2003 Posts: 7 Fuquay-Varina, NC 
|
2002-10-03 43292
Hi folks, I got a new BX 2200 and love it but I have one issue I was hoping someone has some insight on. When I have the range selector in low gear and ride around awhile, it is difficult to move the selector back to the neutral position. The manual says to hold down the brake for several seconds and while holding it down, move the selector. This does not appear to do the trick, I think I have a work-around, push/release the brake a couple of times and then it seems to be able to go to neutral. Moving the tractor forward or backward slightly does not seem to help. I'll mention it to the dealer at the 50 hour maintenance mark, just curious if anyone else has experienced this and has a work-around, thanks for the help.....
Reply to |
Quote Reply |
Add Photolow range to neutral on BX 2200
 | DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada 
 Pics
|
2002-10-03 43298
I hold pressure on the lever (pulling it toward nuetral) as I tap the HST in one direction or the other until it pops out. ....
Reply to |
Quote Reply |
Add Photolow range to neutral on BX 2200
 | Billy
Join Date: Oct 1999 Posts: 975 Southeast Oklahoma 
Pics
|
2002-10-03 43300
Mark got it right but it'll get easier as you get some wear on it. Good luck.
Billy
....
Reply to |
Quote Reply |
Add Photolow range to neutral on BX 2200
| Billy
Join Date: Oct 1999 Posts: 975 Southeast Oklahoma
Pics
|
2002-10-03 43301
I should clarify that I'm talking about a JD but I'd be willing to bet it's the same problem, just new and a bit stiff.
Billy ....
Reply to |
Quote Reply |
Add Photolow range to neutral on BX 2200
| Patriot
Join Date: Jul 2003 Posts: 7 Fuquay-Varina, NC
|
2002-10-07 43477
Thanks guys, that seems to have done the trick..... ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This